Zuken has released an update to E³.series 2017, which marks another milestone in the continuous evolution of Zuken’s powerful electrical, wire harness, and fluid engineering design tool.
Designer-16284 The expression 'Wires' in terminal plan (if wires are output) should be displayed in the defined project language (text database)
Designer-24827 COM method 'Pin.HasDevice' on wire returns true or false depending on what is connected to the wire's end
Designer-31063 Differing behavior when merging cables with "Paste Extended" and directly importing a subcircuit
Designer-31100 Text type "Time of Modification" (#2009) is not updated on terminal plan sheet when adding new terminal
Designer-31275 XVL output does not export the exact wire routing path
Designer-31295 E3 may crash when exporting a subcircuit in connection with assemblies and variant instances
Designer-31318 Consistency error 'E - CCID:001854: check_bmk([xxx]): '[xxx]' already found ([xxx])' due to assembly variant instance as subassembly in another assembly variant instance of an assembly
Designer-31333 Incorrect display of conductor logic lines in connection with pin views
Designer-31351 Scaling factor is not considered at placement on Formboard - with connector with 'changeable' master symbol
Designer-31391 Incorrect translation in descriptions for Japanese (81) and Chinese (86)
Designer-31398 Incorrect message in output window when the project has been saved with "Save as" (per script) and is closed "Closing project xxxx without saving modifications.."
Designer-31407 Panel: When inserting an entire panel into another one, 'shared Sheets' are partially created with incorrect sheet properties (section/scaling)
Designer-31415 COM: Job.JumpToId() doesn´t work with bus pins
Designer-31435 DBE: Symbol text can be edited in the component editor
Designer-31437 The command 'Swap Symbol' doesn't work for a connector on a hierarchical block when it is also placed within the hierarchy 'Symbol 'xxx' can't be placed on following position (xxx.xxx) of sheet 'xxx'.'
Designer-31442 The command "Optimize graphic objects" doesn't work properly for specific elements
Designer-31444 Despite active setting "Linear measure without unit" in the text properties the unit is displayed on a Formboard sheet
Designer-31446 AutoRouting over virtual cable ducts doesn't find valid cable duct connection paths for all wires
Designer-31454 At copy&paste pin attributes with specific combinations may get lost
Designer-31455 Hyperlinks to PDF might be exported incorrect
Designer-31456 Hyperlink doesn't support "https"
Designer-31465 Tooltip displaying "Inactive object found:" on attribute texts inactived by option without showing any further information
Designer-31466 Tooltip doesn't appear anymore for inactive devices with options but for their attribute texts
Designer-31467 An option assigned to a text is displayed as variant and option in tooltip
Designer-31469 Not all component versions are displayed in the component table when using the 'Search' function - 'Blank'- or 'sys' versions are missing
Designer-31476 Automatic repair of incorrectly linked variants
Designer-31478 Conversion to version 2016 deletes the original in variants and doesn't enter the correct new component code
Designer-31479 PDF export via COM outputs sheets with embedded sheets (formboard, panel) twice, when the sheets are determined using the structure node
Designer-31485 Selection of text linked to an attribute by using F2 leads to error E - CONSISTENCY ERROR: get_attval(): inv source (1090).
Designer-31488 Negated aliases are not displayed when the setting "Display all Options" is active
Designer-31493 Attributes in the 'Component table' are not always displayed
Designer-31522 MU: When opening a big MU project message "Cache is invalid" might appear
Designer-31526 After cutting pins of a model with Step models on a model sheet within the database editor, the sheet appears in 3D mode
Designer-31530 "Recent Multi-User Projects" may contain incorrect entry without path
Designer-31532 The COM method "Option.GetPinIds" doesn't consider cable conductors
Designer-31569 Long-running problem when copying a block with a block connector component with 300 pins
Designer-31576 Attribute text template symbol on a mating connector, that has its Device Designation assigned by a block, isn't updated automatically
Designer-31588 Wrong display of panel models in 2D in combination with breakouts which are not in direct connection to the model
Designer-31590 Error when pivoting fix cable ducts/mounting rails from database without predefined side view symbols of the model
Designer-31592 Tooltip is not displayed at inactive variants/options
Designer-31599 Foreign language texts in the info column at selection of connector pin terminals are not translated in all dialogs
Designer-31613 Models with variant position are deleted although they are active at functionality 'Save as' with active option 'Save current configuration without variants / options'
Designer-31664 The export of a sub-circuit may take very long
Designer-31675 No ability to add the column "" to the connection table if the column has been deleted
Designer-31704 Attribute values with options which are also linked to variants don't change the text when the options are switched and "all variants" are set
Designer-31706 A text that displays attribute values with options that are also linked to variants is hidden when empty texts shall not be displayed and "all variants" is set
Designer-31725 MuAdmin Export of Version 2017-1823 can't be imported to the same version - 'Unknown object version. Version 1810 of import file'
About Zuken E³.series 2017. Zuken’s E3.series is a Windows-based, scalable, easy-to-learn system for the design of wiring and control systems, hydraulics and pneumatics. Its object-oriented architecture provides an integrated and consistent design approach to help eliminate errors, improve quality and reduce design time.
The latest release contains new and enhanced functionality that further increases productivity throughout all phases of engineering, from design to manufacture. New third party integrations extend the E3.series ecosystem of solutions.
Enhancements in E3.series 2017 cover all main E3.series modules: E3.schematic, E3.cable, E3.panel, E3.formboard and E3.PLC Bridge.
About Zuken. Zuken works globally with leading companies to optimize their electrical and electronic engineering design and related manufacturing processes through the provision of leading edge software and consulting services. Our unique combination of proven experience, technological expertise and agility creates best in class solutions. Our transparent working practices and belief in integrity in all aspects of business produces long lasting and successful customer partnerships.
Product: Zuken E³.series
Version: 2017 version 18.30 (Integrated DVD and Update Only)
System Requirements: PC
Supported Operating Systems: Windows 7even and newer
Software Prerequisites: Zuken E³.series 2017 or above
Download File Size:5.7 GB